12/12/2011

Front Panel Aluminium Chania Replaced Vinyl Sai

Modern domestic construction materials market added a new decoration material intended for facing facades of buildings and houses - with aluminum siding panels Chania (HANYI), which ideally combine practical high performance and elegant appearance, which creates a magnificent exterior of buildings. As the director of our 'East' Andrew M. Bobkov, front siding panels are light weight of Chania, which distinguishes them from other building materials, provide excellent noise and heat insulation of buildings, carried out in compliance with all environmental requirements and are designed for long-term operation without compromising its characteristics, so are the front panel of Chania is currently the most profitable option of building material. An important advantage of front panels and Chania is recognized that they do not degrade or change under the influence of environmental hazards, in fact, harmful effects of atmospheric phenomena on the people greatly reduced, which has a positive effect on the general well-being. Panels of Chania covered by seven layers of a special resin paint, are carried out in fifty color tones and hues, and the warranty coverage is 50 (!) years.

The surface of the siding panels can be performed with an ornament that simulates mosaics, ceramics, stone, brick, and there are other options for the design. Andrew M. also noted that the siding panel assembly of Chania is no difficulty, special processing podlegayuschih surfaces do not performed, and the use of parts for the connection type 'dad-mom' to make installation of panels allows even untrained builders without any special knowledge. Also noted that there is no need to strengthen the framework design, since the mass of the siding panels is very small (5.6 kg). Panels are available in Chania length 3800 mm, a width of 380 mm and 16 mm thick, and the total surface area of 1.444 square meters. For more information on all news "Companies East" can be obtained by calling (4232) 71-96-49 or visit the company - Company 'Eastern' activities: logistics, import, customs clearance of goods from China. Wholesale deliveries of building materials on the Russian market.
Dec 12, 2011 6:14:11 AM

Verify your Comment

Previewing your Comment

Posted by:  | 

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Leave a comment

(URLs automatically linked.)

Your Information

Name and email address are required. Email address will not be displayed with the comment.

NEXT POST
BUILDER Success Not happy with local producers and the prospect of opening plants manufacture of paint products on the territory of Ukraine by large foreign producers. The price for the products of the latter may be much lower than domestic ones. In addition, now the domestic producers have to work in closer competition, which dictates the rules of the game on the market. We have to find new ways to attract consumers to their brand of products. Most market operators we interviewed prefer advertising in the media. CONSUMERS Domestic manufacturers conventionally divided consumer paint products in several categories. The first is the large construction companies engaged in construction of housing, administrative and residential buildings. Depending on the object become expensive or cheap, both domestic and imported large paint products parties. This group of consumers is about 30% of the total consumption of paints. Another category - maintenance and construction crews performing repair varying degrees of complexity consume about 20% of production. Most Active use of expensive imported paint, but also for the 'quick' repair - the cheapest domestic production. The third group of consumers experts attribute of individuals, who buy about 15% of paint and repair work household needs. Mostly use cheap paint both domestic and imported. Along with the main consumer of today coatings - construction industry - each year more loudly declares itself as a consumer paint engineering, industrial sector. Experts estimate the need for Ukraine in paints from 100 tons to 250 tons per year, of which the capital requirement of more than 5 tons per year. Note BUILDER Success color to 90% depending on the quality of preparation of the surface. Most of the material requires pre-treatment primer compositions are 2-3 times lengthening the life of paint. Plaster, which is not 'survived' at least 2 or 3 months...
PREVIOUS POST
Radiation The most appropriate way of heating gases and vapors to a high Temperature is a discharge. By selecting a particular gas or vapor can be selective radiation in the interest of the spectrum. Thus, when using gas or vapor as a source of optical radiation can be increased efficiency and get the desired spectrum of radiation. Luminescence. At the heart of the action of fluorescent light sources are different ways of making certain types of energy directly into optical radiation. It occurs when the localized absorption of external energy particles of matter and subsequent radiation of this energy and therefore not related to the thermal state of the body. Due to this fact, perhaps more luminescence efficient conversion of input energy into optical radiation. Luminescence is called spontaneous emission in excess compared to the heat, if its duration is much greater than the oscillation period electromagnetic wave corresponding to the radiation. Luminescence is observed in gaseous, liquid and solids. The luminescence spectrum may consist of individual lines (emission of individual atoms and ions), the bands (Emission of molecules) and continuous sections (emission of solids and liquids). Solid or liquid substance capable of emitting light under the influence of different kinds of excitations, called phosphors. In contemporary sources light is mainly used electroluminescence and photoluminescence. Electroluminescence - optical emission of atoms, ions, molecules, liquids and solids under the impact of electrons, ions accelerated in the electric fields up to energies sufficient to excite. Electroluminescence of gases and vapors are excited by electrons in the gas discharge is the primary cause of radiation discharges and is widely used in discharge sources light. Different types of EL phosphors used in electroluminescent panels. Phosphors glow under the impact of electrons of sufficient speed, known as cathodoluminescence, used in cathode ray tubes, picture tubes, electron-optical...