01/26/2012

RUFLEX Strength

Adding polymers provides a roof strength and resistance to deformation. Top covered with mineral grit gets unusual color shades. Installation is easy. This is largely due to the fact that the soft tile adhesive is available - on the reverse side is applied a thick layer of special asphalt. To that it does not stick together during storage and transportation, the top covered with foil. It is also worth noting that the installation does not require any special tools, thus laying the power of any.

It is not so very complicated technology installation, shingles installed on the base, which can serve as a solid crate. Benefits: - Compatible with roofing material (thus, perfect for repairing old roofs). - Has thicker (3-5 mm) - limited to laying a single layer. - Does not rust, does not absorb moisture, does not burn. - Has a very affordable price. - Does not create noise in the rain and hail. - Requires no additional coloring.

Most Popular Brand: RUFLEX (Rufleks) - Finnish high-tech shingles, characterized by durability, ease of installation and compatibility with any architectural design. RUFLEX (Rufleks) is used for roofing, the slope of which is from 11 to 90?. SHINGLAS (Shinglas) - developed by the largest roofing company TEKHNONIKOL. The advantage of "Shinglas" is that individual tiles can be painted uniform, which creates the effect of radiance in the sun. In addition, this asphalt tile has increased waterproofing properties. TEGOLA (Tegola) - Italian tile, which is popular with customers for over 30 years. Using patented technology allows the company to produce a product whose strength is 30% higher than that of counterparts. Among the latest innovations in the world roofing market is worth noting the conquest of the composite tile. Like copper, composite roof made of sheet steel, which gives it strength. In the production of sheet from all sides is covered aluzinc (an alloy of aluminum, zinc and silicon), having high anti-corrosion properties.
Jan 26, 2012 12:13:03 PM

Verify your Comment

Previewing your Comment

Posted by:  | 

This is only a preview. Your comment has not yet been posted.

Working...
Your comment could not be posted. Error type:
Your comment has been posted. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.

Working...

Leave a comment

(URLs automatically linked.)

Your Information

Name and email address are required. Email address will not be displayed with the comment.

NEXT POST
Paint Facades Coloring of facades - one of the most important construction work. It is not surprising, as the facade - a person of the building. Alas, but the fronts are too many enemies. This aggressive and atmospheric effects of the environment, and ultraviolet radiation and industrial pollution, and moisture (rain, snow), and the influence of biological factors (mold, fungi, microorganisms). How is all this fighting? How to ensure that the facade of the building served long time without losing their decorative qualities? Materials for painting the facade of the modern facade materials market offers a great variety of coatings and technologies for the facade. This - curtain walls, and vinyl steel siding, facade tiles, etc. However, despite this, the most widely used in modern construction are paints for facades. Plastering and painting the facade - is still the most popular ways to update and finish facade surfaces. A significant portion of facade problems can be solved by painting the facade. In addition, it is the most economical way to facades. Facade Coloring A significant part of the facade of problems can be removed with the help of reliable and high quality finishing of building facades. The optimal solution in this case is the use of protective and decorative paint facade materials, which not only provide long term protection of the facade from the ravages of the environment, but also give the surface a decorative appearance. The main surfaces of the facades to be color, are concrete and plaster. These mineral surfaces are different capillary-porous surface. It is through the pores of the concrete into the water can easily penetrate and wet, which significantly accelerates the process of destruction of the surface. Humidity of the substrate - a major cause of most injuries facades. Any humidity (moisture of the soil, water vapor,...
PREVIOUS POST
The Joints In order to improve the protective properties of the joints of panels of the film is recommended to glue the sticky tape (duct tape). Coatings based on polyvinyl chloride (PVC), often incorrectly called linoleum easy enough to wash out of most kinds of pollution, so protect them well enough to lay a floor thick polyethylene film. In the course of work maximum amount of dirt is formed by perimeter of the room. In this regard, the protective film preferably stick tape to the skirting. Coving dismantled only in case of replacement, replacement of flooring or parquet sanding. If you do not repaint baseboards required, they should protect the masking tape. Masking tape - a special adhesive tape on paper, which after the work is easy (as opposed to tape) is removed from the protected surface. Decorative borders with sockets and switches removed, and 'stuffing' stick with masking tape. Naturally, all electrical circuits must first be de-energized. Dismantling of old coating Preparation of walls and ceilings begins with dismantling (removal) of existing coatings. Currently, the most common ceiling coverings is a water-dispersion paint. In old houses ceilings trimmed with lime wash. More rarer ceilings, painted with oil or alkyd enamels. Water-dispersion paint and enamel are not dissolved by water, so wash them with the ceiling surface is virtually impossible. Sufficiently removed by steel spatula and cover any loose parts of the crack angle to embroider the same spatula. Enamel is desirable to handle with sandpaper to increase the roughness and improve the adhesion with newly inflicted layers. Lime wash must be washed before the underlying layer of putty. It's simple, but very time-consuming operation, run by the thoroughness of which depends on the quality of the new coating adhesion to the base (residues separating layer of whitewash are significantly reducing the...